1. <span id="d16va"></span>

    1. <acronym id="d16va"></acronym>

      <optgroup id="d16va"></optgroup>

        <ol id="d16va"><blockquote id="d16va"></blockquote></ol>

          <acronym id="d16va"><blockquote id="d16va"></blockquote></acronym>
          <optgroup id="d16va"></optgroup>


            • 寧夏濟泉供水設備有限公司
            • 地址:銀川市德勝工業園豐慶西路18號
            • 電話/傳真 0951-8979456
            • 24小時熱線 13639511181
            • 銷售 熱線 18095174046
            • 售后 熱線 15109617822
            • E-mail: 506295890@qq.com
            • http://www.spencerhollingsworth.com/


            發布時間:2016-03-01 14:02:37

            SMC sectional water tank is held together by the SMC molded board, sealing materials, metal fasteners and piping system combinations can be assembled according to user needs-1000m3 tank. The tank for industrial and mining enterprises in life and fire water, residential and public buildings, as well as higher water quality requirements of food, medicine, health and other storage facilities.
            SMC FRP sectional water tank veneer specifications, performance and sweep the implementation of standards
            SMC molded veneer Specifications: 1000 × 1000mm, 1000 × 500,500 × 500mm.
            Thickness 5mm, 8mm, 10mm, 12mm, 14mm, 16mm, 5mm thickness of the veneer is designed for the tank cover.
            The SMC molded veneer molded by the mechanization of its properties are as follows: tensile strength ≥ 60MPa, the bending strength of ≥ 100 MPa, flexural modulus ≥ 7.0GPa Barcol hardness ≥ 60, water absorption ≤ 1.0%, the glass fiber content of ≥ 25%.
            SMC sectional water tank quality of the implementation of the People's Republic of China's building materials industry "JC-658.1-1997 standard.
            SMC sectional water tank hygiene standard GB5749-85 standard of the People's Republic of China.
            SMC sectional water tank installation and commissioning: the tank base concrete strip beam can be used, or I-beam. Top of the tank on the corner has breathable air filtration devices. Inside the water tank using the stretch. Each nozzle flange are 1.0MPa standard flange. In the layout of the location of the tank, you should refer to GB17051-1997 secondary water supply facilities, sanitation norms.